Metalworking -Shop №1

Turning — Ø3000 x 10000 mm. weighing up to 10 tons
Carousel — Ø4000 x 1650 mm. weighing up to 15 tons
Milling :

  • 3-axis — max. dimensions 1200 x 3000 x 4000 mm., weight 20 tons .;
  • 5 coordinate — max. dimensions 1800 x 2000 x 1400 mm., weight 8 t.

Horizontal boring — max. dimensions 2200 x 2900 x 2900 mm., weight 64 t.
Jig boring — max. dimensions 1400 x 1400 x 2240 mm., weight 2.5 t.
Grinding :

  • round — Ø350 x 1400 mm., weight 1 t.
  • internal — Ø300 x 600 mm., weight 0.5 t.
  • flat — max. dimensions 1100 x 1500 x 4500 mm., weight 6 tons.

Toothpick :

  • gear hobbing — max. module 16 mm., max. Ø1250 mm .;
  • shredding — max. module 8 mm., max. Ø500 mm. (while the width of the crown is not more than 100 mm., the height of the part is not more than 200 mm.);
  • gearing — module 1 — 6 mm., Ø20 — 320 mm .;
  • Dental for spur bevel gears — max. module 10 mm., max. Ø500 mm .;
  • gear cutting into circular conical pairs — max. module 8 mm., max. Ø500 mm .;
  • gear grinding — max. module 12 mm., max. Ø630 mm.

Slot processing :

  • slot milling — max. Ø250 mm. (above caliper), max. Ø500 mm. (above the rails), max. module 3 mm., cutting length 1000 mm .;
  • grinding — max. Ø125 (machining), max. Ø320 (parts), max. processing length 850 mm., max. part length 1000 mm.

Planing — max. dimensions 900 x 1000 x 3200 mm., weight 1.5 t.
Stretch — max. Ø600, max. length 1200 mm. (the length of the tool (broach) 400 — 1365 mm.
EDM — cutting and flashing holes and cavities of complex configuration.


work